# OSSO frameless r1 fab outputs (generated 2026-10-28, America/Detroit). 

| Board | Status |
|---|---|
| OSSO_top_v1n | ordering 5 pcs (2026-10-28) |
| v3e | not ordered |

Generator: `project/pcb/fab/gen_frameless_r1.py`. It extends `gen_v3c_gerbers.py` and reuses its writer and geometry. Review: `project/pcb/fab/tools/check_frameless_r1.py`. STEP/GLB: `project/pcb/fab/tools/make_pcb_step_frameless_r1.py`, which parses the board back from the GKO and Excellon fab files.

| Board | Dir / zip | PTH | NPTH |
|---|---|---|---|
| Middle v3e (`OSSO_blank_v3e`) | `OSSO_blank_v3e/`, `OSSO_blank_v3e_gerbers.zip` | vias 71, fid 2, TH 48, pwr 4 | tool 1, M2 anchor 4, **snap Ø3.0 x4**, slot 1 |
| Top/bottom v1n (`OSSO_top_v1n`) | `OSSO_top_v1n/`, `OSSO_top_v1n_gerbers.zip` | vias 27, fid 2, grid 856, strip 22, CE 64, pwr 4 | tool 1, CE mtg Ø3.3 x4, **snap Ø3.0 x4**, slot 1 |

- **Spec:** 140x140, 1.6 FR4, 2 layers, 1 oz, ENIG, black mask, white silk flood, no panel. Notes are in each `FAB_NOTES.txt`.
- **Copper:** v3c intent. Zero-clearance pour on both layers, every pad tied in, and only the fiducials isolated. Ø5.0 copper-free voids surround the snap holes, and copper pulls back 0.3 around every NPTH.
- **Review:** `review_<board>/`: per-layer PNGs, `render_top_copper/top_face/bottom_face/drill.png`, `review_sheet_<board>.png`, `checks.json`. Both boards: ALL PASS.
- **Ghost STEP and GLB:** `<board>_ghost.step` and `<board>_ghost.glb`. The STEP colour is light grey-green with SURFACE_STYLE_TRANSPARENT 0.75. It holds the outline, routed cutouts, slot and every PTH and NPTH hole; vias are excluded. The GLB uses a BLEND material and its default camera is a front view. Counts are in `step_contents.json`.
