OSSO_blank_v3e - FAB NOTES (please read; this board is intentionally non-standard)
Spec: 2 layers, 140x140mm, 1.6mm FR4, 1oz Cu, ENIG, BLACK mask, WHITE silk. Single boards, NO panel, NO tabs.
1. SILK: full solid white flood on both sides, over copper and mask. Do NOT clip or remove; use the silk exactly as drawn (already pulled back from pads, holes, cutouts and edge).
2. COPPER: full solid pour both sides, fully covered by mask except the pad openings. Intentional; do NOT remove or thieve.
3. ENIG only where mask is open. Vias are tented: 0.3 drill, 0.6 pad. The 48 TH pads are masked (as v3c).
4. All pads are solidly tied into the pour with zero clearance - intentional. Only the fiducials have copper-free rings. Copper-free Ø5.0 keep-outs (both sides) surround the 4 Ø3.0 NPTH snap holes; this is intentional.
5. Boards are laser-processed downstream by the customer.
6. NPTH (file OSSO_blank_v3e-NPTH.TXT): 1x Ø3.0 tooling hole at (70,4.0); 1x 2.0x3.0mm routed slot at (70,136.0), long axis Y (Ø2.0 tool routed X70Y135.5 to X70Y136.5); 4x Ø2.2; 4x Ø3.0 snap holes at (56,42.5),(84,42.5),(56,97.5),(84,97.5). Copper pulled back 0.3mm around all NPTH. Plated holes are in OSSO_blank_v3e-PTH.TXT.
7. Routed internal cutouts on outline layer (.GKO): 12x26mm slot and 27x74mm window. Outline 140x140, R4 corners.
8. Please hold +/-0.05mm position tolerance on the Ø3.0 tooling hole, the 2.0x3.0 slot, the Ø0.4 plated fiducial holes at (22,4) and (118,4), and the four Ø3.0 snap holes.
9. NO order number, date code, UL logo or added labels/branding. Intentional marks only: pin-1 triangle voids in the silk, a small 1.2mm 'OSSO v3e' version mark as a silk void on the bottom rail (mirrored on the bottom side), and the copper fiducials A(22,4), B(118,4) plated; C(118,136) top-only, C'(22,136) bottom-only surface marks. Keep them.
10. Paste layers are empty (no stencil).
11. Jig clamp zones (keep exactly as drawn: masked solid pour, no vias, pads, holes or mask openings), both sides, x0,y0-x1,y1 in mm: (27,1)-(63,6), (77,1)-(113,6), (27,134)-(63,139), (77,134)-(113,139).

Hole counts: PTH via 71, fidAB 2, th 48, pwr 4 (total 125); NPTH tool 1, anchor_M2 4, snap 4 + 1 slot.
