{
 "mSLA tough resin E 1.6 GPa": {
  "tine_radial_force_N": 1.29,
  "insert_force_per_tine_N": 1.37,
  "total_snap_force_N": 11.0
 },
 "mSLA standard resin E 2.5 GPa": {
  "tine_radial_force_N": 2.02,
  "insert_force_per_tine_N": 2.14,
  "total_snap_force_N": 17.2
 },
 "comfortable_one_hand_push_N": "50-150 (palm push on a bench, seated user); thumb press ~30-50",
 "verdict": "OK by hand: ~12-20 N peak, well under a comfortable palm push and even a thumb press; x3 margin covers print/geometry spread",
 "strain_check": "1.69 % at full deflection (snap_checks r5) - within tough-resin elongation; standard (brittle) resin NOT recommended for the clips"
}